Power switching mods...
- Thread starter LatsMcGee
- Start date
trevorus
Modsterbator
Re: Power switching mods...
There's some ways this could be done, but all of them are quite a compromise. Switching to cathode bias, from pentode to triode, or modding to change tube types can all drop power levels. The issue is, you'll be changing headroom, and less the actual decibel levels.
There's some ways this could be done, but all of them are quite a compromise. Switching to cathode bias, from pentode to triode, or modding to change tube types can all drop power levels. The issue is, you'll be changing headroom, and less the actual decibel levels.
jon the art guy
Nerdy Nerd
Re: Power switching mods...
Thar's dese heer tings from London Power...
http://www.londonpower.com/power-scaling
Or instead of trying to make the amp quieter, make the speakers quieter. Put together a 1x12 with a low db speaker. You could also buy/fab an isolation cab.
Thar's dese heer tings from London Power...
http://www.londonpower.com/power-scaling
Or instead of trying to make the amp quieter, make the speakers quieter. Put together a 1x12 with a low db speaker. You could also buy/fab an isolation cab.
