Problem with s-1 switching system, Need help.

jalguitarman

Junior Member
I just got done wiring in my new pick ups and when i use the second position ( brdge pick up split and paired with the middle single coil) i get the same amount of hum as the center position. From what i can tell everything is hooked up right. The pick ups in question are dimarzios. Now the fourth position on the swicth does fine no hum, not sure what the problem is. This guitar has the fender s-1 switching system. The only pick up conection to this is a wire from the neck single coil and the neck pick up is not the trouble> Please help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!:gurmpy:
 
Re: Problem with s-1 switching system, Need help.

It sounds like you may just be selecting the wrong coil of the bridge. If you split by shorting to the ground wire, then short to the hot wire instead. And vice-versa.
 
Re: Problem with s-1 switching system, Need help.

Check this out!! I called some one at guitar center who is a tech and he said a may be a propriety circuit. So i put the old one back in and it funtions Fine. I will try what you said Artie thanks!!!
 
Back
Top