B BloodRose Professional Scapegoat Aug 21, 2004 #1 What is safe and effective to remove gold plating from guitar parts? The gold on the trem and knobs is mostly worn away, so Id like to just strip it. Thanks!
What is safe and effective to remove gold plating from guitar parts? The gold on the trem and knobs is mostly worn away, so Id like to just strip it. Thanks!
T theboatcandream dreamonologist Aug 21, 2004 #2 Re: Removing gold finish? I was told to use paint stripper. It didn't work. So I used fine steel wool. It worked.
Re: Removing gold finish? I was told to use paint stripper. It didn't work. So I used fine steel wool. It worked.
59paul New member Aug 21, 2004 #3 Re: Removing gold finish? theboatcandream said: I was told to use paint stripper. It didn't work. So I used fine steel wool. It worked. Click to expand... Sounds like a good solution to me.... I'd make sure you use 0000 steel wool. Also, if ya want the parts to shine afterwards, use some Brasso on them. It can usually be found at any Hardware store, and it's inexpensive. ...
Re: Removing gold finish? theboatcandream said: I was told to use paint stripper. It didn't work. So I used fine steel wool. It worked. Click to expand... Sounds like a good solution to me.... I'd make sure you use 0000 steel wool. Also, if ya want the parts to shine afterwards, use some Brasso on them. It can usually be found at any Hardware store, and it's inexpensive. ...
Zerberus Baron Von Shred Aug 21, 2004 #4 Re: Removing gold finish? 0000 Steel wool, elbow grease, and patience