singlecoilhater
New member
does anyone know of ways of solving this problem besides replacing them? preferabally with something around the house so i wouldnt have to buy anything. would WD-40 work?
scratchy pots
- Thread starter singlecoilhater
- Start date
STRATDELUXER97
Stratoblaster Tone Meister
Re: scratchy pots
WD 40 isn't the right product for that..Get some cleaner from Radio Shack...Something like tuner cleaner and very sparingly use it and see if it fixes your problem...If not replace the pot and be done with it...A good pot will cost you around $5 to $6 or so...Go easy...Less is more with these cleaners.Don't drown the pot with lots of cleaner running all over the place..
John
WD 40 isn't the right product for that..Get some cleaner from Radio Shack...Something like tuner cleaner and very sparingly use it and see if it fixes your problem...If not replace the pot and be done with it...A good pot will cost you around $5 to $6 or so...Go easy...Less is more with these cleaners.Don't drown the pot with lots of cleaner running all over the place..
John
STRATDELUXER97
Stratoblaster Tone Meister
Re: scratchy pots
Thanks Beandip...Hey no need to swell my head up too big...Just here to get answers and help others my friend...Appreciate the nice post though..
Glad I was able to help you out buddy..
John
beandip said:
Thanks Beandip...Hey no need to swell my head up too big...Just here to get answers and help others my friend...Appreciate the nice post though..
Glad I was able to help you out buddy..John
STRATDELUXER97
Stratoblaster Tone Meister
Re: scratchy pots
Thanks brother,that's very nice...You know how to hook up with me if I can help you in anyway...
John
beandip said:
Thanks brother,that's very nice...You know how to hook up with me if I can help you in anyway...
John
Re: scratchy pots
If your pots need replacing then that's what they need as worn pots get a lot of carbon that breaks up and does that junk ... However if they just started doing it, it could just be crap in the pots, dust sawdust, etc., for me Craig Deoxit D5 is what I use, it's a great cleaner,and lubricant as well. You can take a cloth and spray the end of a guitar cable, wipe it, and *see* the difference right away. Any electronics supplier will stock it, Digikey, and MCM both carry it, as well as Newark I believe ... good stuff, never got it on a pickguard or pup cover, so I would be careful with it there. Also that Radio Shack tuner cleaner/degreaser works well,but I don't think it lubricates, and leaves the protective coating that the Craig does.It most certinly doesn't clean thru the oxidation as well.singlecoilhater said:
STRATDELUXER97
Stratoblaster Tone Meister
Re: scratchy pots
Yep...I have the Deoxit box that has a whole assortment of different sprays and lubricants,but the original post leaned towards keeping things simple and inexpensive from what I got out of it....Radio Shack is always reachable...I use the Caig stuff and it's great..I don't skimp or cut corners with my gear! :wink:
John
ArtieToo said:
Yep...I have the Deoxit box that has a whole assortment of different sprays and lubricants,but the original post leaned towards keeping things simple and inexpensive from what I got out of it....Radio Shack is always reachable...I use the Caig stuff and it's great..I don't skimp or cut corners with my gear! :wink:
John
STRATDELUXER97
Stratoblaster Tone Meister
Re: scratchy pots
True enough John, and Art, but I find that the Caig generally does pay for itself, and you use less of it ... I hear of some guys just soaking the pots or switches in the stuff, wasteful and unecessary ... however just about ever other person on the planet makes some kind of contact cleaner/lube ... were things really get confusing is when the offer *slightly* different compounds that have *slightly* better performance over others for certain metals ... can get confusing. One thing I don't recommend (although it might get one out of a spot on a pot that's just about gone) is cleaning with WD-40, or just using a cleaner that doesn't contains a lube. Some cleaners are made to almost strip down the metals/carbon to clean them, and take away any lube/protective coating that was there. However a bit of tuner cleaner Ala Radio Shack, and then a little CRC 3-36 (or 5-56 if you can still get it) as a lube/portective coating is nice, especially in saltwater areas as the 5-56 (I think that was the one) was made for corrosive salt/ionic ... high humidity enviroments ... works a bit better on metal than WD-40, and tends to be a bit more gentle on carbon, and conductive plastics. I used to work on and around boats ... so that's were the CRC got introduced.STRATDELUXER97 said:
Re: scratchy pots
Yeah, a good cleaner/lubricant spary, a couple blasts, twiddle,twiddle,twiddle, a couple more blasts,twiddle,twiddle,twiddle, a wipe or two form a cloth,maybe a hit of compressed air, another wipe or two, and your off ... repeat once a year ... and put some speed knobs on it ...( actually anything your comfortable with, I like speed knobs or the Fender barrel knobs)...LesStrat said:
