Seymour Duncan mV Data
- Thread starter Scott Olson
- Start date
Diminished Triad
New member
frankfalbo
In Fluence Y'all
Re: Seymour Duncan mV Data
Yeah it's the SLUG. The THUG would be the Mike Tyson signature version.
Zombiemetl
New member
Re: Seymour Duncan mV Data
nice to see some numbers instead of always hearing speculation!
nice to see some numbers instead of always hearing speculation!
CTN
The Drama Dude
Re: Seymour Duncan mV Data
sometimes, when I play guitar, if i hold my breath really long, eventually I start to lose consciousness and just as i'm on the verge of blacking out, assuming I can still hear my guitar tone or even just stand up if I haven't already collapsed in a fleshy heap, I hallucinate graphs and frequency response curves that dance in unison with my guitar strings.
It's surreal.
Y'all should try it.
sometimes, when I play guitar, if i hold my breath really long, eventually I start to lose consciousness and just as i'm on the verge of blacking out, assuming I can still hear my guitar tone or even just stand up if I haven't already collapsed in a fleshy heap, I hallucinate graphs and frequency response curves that dance in unison with my guitar strings.
It's surreal.
Y'all should try it.
Diminished Triad
New member
Re: Seymour Duncan mV Data
So, where does the SLUG rank and rate among the heavy hitters?
Yeah it's the SLUG. The THUG would be the Mike Tyson signature version.
So, where does the SLUG rank and rate among the heavy hitters?
Big Flannel
New member
Gibson 1964
New member
Re: Seymour Duncan mV Data
As a slug owner, I would be interested in that number.
As a slug owner, I would be interested in that number.
Edgecrusher
New member
Re: Seymour Duncan mV Data
Yeah but then when it speak it would have this teeny tiny Shirley temple voice and you would wind up laughing at it.
Yeah but then when it speak it would have this teeny tiny Shirley temple voice and you would wind up laughing at it.
darthphineas
New member
Re: Seymour Duncan mV Data
Has anyone else noticed that according to those #s that the PB has less output than the 59? Wasn't the PB marketed as being an in-between ground of the 59 and the JB? Outside of not quite hearing it, those #s seem to prove it.
Sent from my armored space station via iPad using Tapatalk
Has anyone else noticed that according to those #s that the PB has less output than the 59? Wasn't the PB marketed as being an in-between ground of the 59 and the JB? Outside of not quite hearing it, those #s seem to prove it.
Sent from my armored space station via iPad using Tapatalk
Metalblaze
New member
Re: Seymour Duncan mV Data
Great!!! Super!! Knowing very well pickups like the JB, Custom or Invader. I can now estimate a lot more accurately about the rest. Great job! Bravo!
Great!!! Super!! Knowing very well pickups like the JB, Custom or Invader. I can now estimate a lot more accurately about the rest. Great job! Bravo!
darthphineas
New member
Re: Seymour Duncan mV Data
I'm still waiting for an answer for post #62 from anyone who actually works at SD that can ask people in Engineering.
I'm still waiting for an answer for post #62 from anyone who actually works at SD that can ask people in Engineering.
Last edited:
LtKojak
New member
Re: Seymour Duncan mV Data
Being a difference of about 500 turns per bobbin between the Seth Lover neck and bridge, it's highly unlikely that both produced exactly the same output... unless the Gauss charge of the magnet present in the Seth bridge was 10% less than the neck one.
HTH,
Being a difference of about 500 turns per bobbin between the Seth Lover neck and bridge, it's highly unlikely that both produced exactly the same output... unless the Gauss charge of the magnet present in the Seth bridge was 10% less than the neck one.
HTH,
beaubrummels
Well-known member
Re: Seymour Duncan mV Data
http://www.seymourduncan.com/blog/p...our-duncan-interactive-video-pickup-selector/
http://www.seymourduncan.com/blog/p...our-duncan-interactive-video-pickup-selector/
RayBarbeeMusic
New member
Re: Seymour Duncan mV Data
Something is wrong.
First of all, if this was really done with a 50k input impedance, the results are darn near meaningless.
Second of all, there is simply *no way* a SH10N full shred neck rivals the output of a JB. None. Sorry. I'm not even going to get into a mathematical discussion, the premise is flawed on its face.
7.4k of 42ga wire with an A5 and allen screw poles possesses no magic that would make it produce that kind of voltage. You might get something approaching that with 7.4k of 40 ga wire, but you couldn't fit it in the coils.
It's interesting, but I'd recommend going back to the drawing board.
Something is wrong.
First of all, if this was really done with a 50k input impedance, the results are darn near meaningless.
Second of all, there is simply *no way* a SH10N full shred neck rivals the output of a JB. None. Sorry. I'm not even going to get into a mathematical discussion, the premise is flawed on its face.
7.4k of 42ga wire with an A5 and allen screw poles possesses no magic that would make it produce that kind of voltage. You might get something approaching that with 7.4k of 40 ga wire, but you couldn't fit it in the coils.
It's interesting, but I'd recommend going back to the drawing board.
