Re-doing a Schecter PT Custom. Replacing the factory setup with Bareknuckle Holy Divers and trying to do 2 volume and 2 tone is using stacked pots (1 for each pickup) and a 5way 4 pole Super-switch. Would prefer Neck Series, Neck Parallel, Neck and Bridge Series, Bridge Parallel, and Bridge Series configuration.... but a this point I’ll take what I can get. I can’t find any diagram for 2 volume and 2 tone, just 1 volume 2 tone. Is my dream even possible?????
Super Switch Help....
- Thread starter D MacK
- Start date
Audioguy2279
New member
Re: Super Switch Help....
With just a super switch, maybe. I got to get the pad and pencil out for that one.
I do a similar wiring:
1-Neck HB
2-Inner coils from both HB
3-Both HB
4-Outer coils from both HB
5-Bridge HB
All can be in series or parallel, hum canceling. which I do with a push pull volume pot.
Four knob, let me think on that one.
With just a super switch, maybe. I got to get the pad and pencil out for that one.
I do a similar wiring:
1-Neck HB
2-Inner coils from both HB
3-Both HB
4-Outer coils from both HB
5-Bridge HB
All can be in series or parallel, hum canceling. which I do with a push pull volume pot.
Four knob, let me think on that one.
Re: Super Switch Help....
Anything you can come up with will be helpful. I’ve got a few ideas of my own to try, hopefully something will work.
Anything you can come up with will be helpful. I’ve got a few ideas of my own to try, hopefully something will work.
Re: Super Switch Help....
I wrote a blog on how I wired up a Super Switch and 2 humbuckers...maybe it will help?
I wrote a blog on how I wired up a Super Switch and 2 humbuckers...maybe it will help?
