The thread you all wanted... The cure for the TS circuit!!

Pierre

Stratologist
Hehe take this tongue in cheek ;) but the main reason people use the TS as a boost is because its stock gain is very nasal and boxy sounding.

To get rid of it is pretty simple, especially for lower grade circuits like the SD1 which use slightly less good components.

There are mods readily available out there, easy to perform and cheap.

Diodes: replace stock (or not) 4148 by 4001 or 4002.
Opamp: a TL072 has a pleasant sound to the ear. Rid seems to advise a LF353, I never tried one but if Rid says so, DO IT! :P
Caps: replace those boxy looking caps by some nice mica or metal boxed caps... that'll make the circuit less noisy and more hi fi, 'cleaner' sounding. Of course that's if you want ;)
And in the SD1 circuit... not sure about TSs...C3 by a .1uf and c8 by a .1uf too.

Those are already good basis for a flatter, less humped and cleaner sounding TS :) Hope you enjoy it!

I'd post more mods but a lot of people worked to find them out. I can only suggest what's free out there and easily findable of course. Some of these mods can make an innocent looking SD1 sound way nicer.

And of course the best way to experience a TS is by shredding!























wood-shredder-grinder-crush.jpg


Note: I am not responsible for any damage done to your pedal, or shredder, and shredding a metal pedal is not recommanded.
 
Last edited:
Re: The thread you all wanted... The cure for the TS circuit!!

heheh I signed on there aaaages ago... didn't post much though... :)
 
Re: The thread you all wanted... The cure for the TS circuit!!

sadly you're on the wrong forum for this type of post man. there's about ~5 guys here that know what you're talking about LOL.

-Mike
 
Re: The thread you all wanted... The cure for the TS circuit!!

Make that 7 I know of course.

I went to Technical College, and my soldering and knowledge about this stuff was so good they had me pass in 3 months instead of 5years...

(Dont spoil it rid) :D
 
Re: The thread you all wanted... The cure for the TS circuit!!

Please spoil it Rid.

I never had any lessons or anything myself :( Read, read, looked, tried... bought mods, researched mods, did mods...I know very little but I worked on the SD1 a bit.
 
Re: The thread you all wanted... The cure for the TS circuit!!

Hehe well he do know how to take an op-amp out of the socket and put in another one...without turning it the wrong way:D
But pickups...man he is the Reaper there.....hehe
 
Re: The thread you all wanted... The cure for the TS circuit!!

What!?!? I only killed my HS-3... But my soldering was top-class. It lasted for all 4hours with limited output!
 
Re: The thread you all wanted... The cure for the TS circuit!!

I think it's cool that these kinds of threads pop up here, even though I'm just in the really begnning when it comes to DIY and electronics.

This is my favorite forum so I hang here most of the time and it's really cool that the 5-7 people who know anyhing about these things discuss and share them here as well :D

We other guys learn with time ;)
 
Back
Top