Well, I'm Going To Attempt My First Guitar Assembly

Re: Well, I'm Going To Attempt My First Guitar Assembly

thats a really sweet looking body. i think a rev fb headstock would be awesome on that!
 
Re: Well, I'm Going To Attempt My First Guitar Assembly

This is going to be really cool bro. You have a neck for it yet?
 
Re: Well, I'm Going To Attempt My First Guitar Assembly

To be honest John, I have never actually seen the back of your neck. For all I know you may not have one under all that hair. And sounds can be deceiving. I do not think there is very much red neck about you really except for your accent.

Have you considered getting a burst of some sort? Although having seen the real wood, I have to say, a case can be made natural.
 
Re: Well, I'm Going To Attempt My First Guitar Assembly

This is the flame maple veneer that I bought to put on the headstock. I think it'll match up pretty well with the body.

Picture003.jpg

Picture002.jpg
 
Re: Well, I'm Going To Attempt My First Guitar Assembly

Gonna veneer the headstock on your own even? Damn!! Serious commitment! I applaud!!! I figured youd either go plain or buy one pre done
 
Re: Well, I'm Going To Attempt My First Guitar Assembly

Are you going to run binding on the headstock?
 
Re: Well, I'm Going To Attempt My First Guitar Assembly

NICE! Glad you are doin' the veneer on the headstock! That's gonna rock!
 
Re: Well, I'm Going To Attempt My First Guitar Assembly

You've probably thought about this, but just in case ....

Buy your tuners of choice to know exactly how thick a headstock they can be fitted to. In some instances, veneering a headstock may neccessitate thinning the headstock first. Depends on the thickness of the veneer and how much extra the tuners can accomodate.
 
Re: Well, I'm Going To Attempt My First Guitar Assembly

Very nice!!

I'm with Jeremy on the neck...reverse Firebird would be absolutely awesome.
 
Re: Well, I'm Going To Attempt My First Guitar Assembly

that veneer looks pretty thin so i dont think it should be an issue. ive done that same style veneer a few times and never had an issue
 
Re: Well, I'm Going To Attempt My First Guitar Assembly

crusty philtrum said:
You've probably thought about this, but just in case ....

Buy your tuners of choice to know exactly how thick a headstock they can be fitted to. In some instances, veneering a headstock may neccessitate thinning the headstock first. Depends on the thickness of the veneer and how much extra the tuners can accomodate.
Click to expand...
Actually, I hadn't thought about that. Thanks!!

jeremy said:
that veneer looks pretty thin so i dont think it should be an issue. ive done that same style veneer a few times and never had an issue
Click to expand...
I don't think it will be a problem. It's 1/42" thick.
 
Re: Well, I'm Going To Attempt My First Guitar Assembly

I was just farting around a few minutes ago and took these.


Picture049.jpg

Picture045.jpg


My dyes should be here tommorrow, and I'll get to staining this weekend......hopefully.
 
Re: Well, I'm Going To Attempt My First Guitar Assembly

You can put some mineral spirits on it , I think, to pop the grain for pictures- no harm, no foul.
 
You must log in or register to reply here.

Similar threads

C
First guitar is progressing
2
Replies
32
Views
663
blakejcan
blakejcan
C
Staining body
Replies
10
Views
412
Chris Pile
Chris Pile
C
Check out this hot piece of ash
2
Replies
36
Views
670
ehdwuld
ehdwuld
Z
Help me create an unusual guitar
Replies
9
Views
240
GuitarDoc
G
N
I'm going to order a pickguard from Warmoth, question about SRV countersink
Replies
15
Views
699
solspirit
solspirit
Back
Top