[wiring diagram] 2 triple shot and a 4 ways switch

chatlut

New member
Hi.


I need your help to wiring my guitar with :


2 p-rail & 2 triple shots
1 volume (no push pull)
1 tone (no push pull)
4 way toggle (neck, series, parallel, bridge)




I don't know if it is possible...

Best regards.
 
right. wire up the triple shots as normal, then use the two wires coming off each of them to wire the 4 way
 
What will happen when the two pickups in series are then put in series? Is it like an onboard Muff? :)
 
In your original post you specified the order of switch positions to be...neck, series, parallel, bridge. Just be aware that the Oak Grigsby 4 way will give you bridge, parallel, neck, series, but it will certainly give you the combinations you want. I've got that very combination in several guitars and it works great. But, as was said, in position 4 (series) especially if you have your P-Rails in series, the tone is going to be extremely dark and generally unusable. Just a single P-Rail in series is almost too dark to be useful.
 
In your original post you specified the order of switch positions to be...neck, series, parallel, bridge. Just be aware that the Oak Grigsby 4 way will give you bridge, parallel, neck, series, but it will certainly give you the combinations you want. I've got that very combination in several guitars and it works great. But, as was said, in position 4 (series) especially if you have your P-Rails in series, the tone is going to be extremely dark and generally unusable. Just a single P-Rail in series is almost too dark to be useful.

So I'm going to wire to get : neck, parallel, bridge and mute.
 
Back
Top