Wiring help please

[teddeeh]

hi guys, i am trying to install a blower switch to my prails loaded guitar.

im using '2 p-rails, 1 vol, 1 tone 3way, 2 push/pulls option 2.

when i use vol push pull the blower dosent work. its a dpdt on/on switch im using. is there no way around it, or is there a way i can get the blower to work regardless...?

 

[jeremy]

Re: Wiring help please

what do you want the blower switch to do?

do you want the bridge pup in series with no tone or volume when you hit the switch or something different?

 

[Funkfingers]

Re: Wiring help please

The blower switch will have to go in circuit before the four bridge pickup conductors reach the push-pull pots. I reckon that you require a 4PDT on/on switch.

 

[teddeeh]

Re: Wiring help please

what do you want the blower switch to do?

do you want the bridge pup in series with no tone or volume when you hit the switch or something different?

yes, series regardless of what selection the push pulls are in. i tried wiring, but it wouldnt work with a couple of the options.. just full out bridge humbucker.