My amps picks up A LOT of noise and hum at higher gain settings, making it very unplayable. But the clean tone remains clean. Could this be the filter cap's fault?
My amps picks up A LOT of noise and hum at higher gain settings, making it very unplayable. But the clean tone remains clean. Could this be the filter cap's fault?
Re: Would faulty filter caps affect the clean tone?
It's a Laney AOR30 112 combo, about 16 to 20 years old, not really sure. It came to me a year ago with the original tubes so I replaced them all and rebiased it myself. 2 6V6s and 4 12AX7s.
Re: Would faulty filter caps affect the clean tone?
I agree with jeremy.
it's typical for any amp to be noisier at higher gain settings
I would start by checking the preamp tubes. Either tap very lightly on the tubes with a pencil to find one that's microphonic. Alternately, you can pull them one at a time. This will help locate the source of the noise.