Create your signature model!

[FuseG4]

Re: Create your signature model!

Unique Features:
• Ash telecaster body
• available in black or sage green metallic
• green moto '72 custom pickguard (black/mint/black on sage green metallic)
• hum. neck and tele bridge routing
• Vintage style 6 saddle tele bridge
• Neck is a chrome sh-1n. bridge is a alnico III nocaster RI bridge pickup.
• black witch hat knobs, coil cut for neck humbucker
• Maple 70's strat neck matched to body color including peghead
• Ebony fretboard, one piece maple
• 22-frets
• Medium “C” shape neck
• medium jumbo frets
• dot inlays with "DieJOB" 12th fret inlay
• bone nut
• Schaller locking tuners
• Ernie Ball hybrid slinky strings
• Schaller strap locks

 

[rowdy27]

Re: Create your signature model!

G&L ASAT Custom Classic Semi-hollowbody

PICKUPS
extra-fat large rectangular Magnetic Field Design neck pickup/white, SD Little 59 bridge pickup/black
BODY WOOD
Swamp Ash with twin Voice Chambers, without "f" hole
NECK WOOD
Hard Rock Maple with Maple fingerboard
NECK RADIUS
7 1/2" (190.5mm)
NECK WIDTH
1 5/8" (41.3mm)
TUNING KEYS
12:1 ratio, sealed lubrication, adjustable knob tension
BRIDGE
traditional boxed steel bridge with individual brass saddles
CONTROLS
3 position pickup selector, volume, tone
Reversed Plate/tone,volume then switch
FINISH
Orange Metal Flake
OTHER
Pearl White pickguard. GOLD hardware, G&L molded hardcase included.

With this sticker slapped on it..

 

[B Bent]

Re: Create your signature model!

I am in the process of making my signature guitar. Let's just say it's gonna have representation from everything cool in Fender's past with a nice cool twist to top it off!

I am not saying until I get it in. I'd say it is almost finished by now!

 

[orpheo]

Re: Create your signature model!

for me, it would be a les paul.

25'' scale.
ebony fretboard, superjumbo stainless steel frets, wooden binding (snakewood with maple purfling).

Non-weightrelieved back. made of: PURPLEHEART!
solid rosewood top
kahler tremolo
wooden binding (the white will be maple, the dark will be rosewood, ebony and walnut).
3 gold trisonics with alumitone, next to eachother
triple shot rings
for each pup, volume and tone (2 regular pots, 2 concentric pots)
neckthru
oil and wax finish.

 

[ImmortalSix]

Re: Create your signature model!

I am in the process of making my signature guitar. Let's just say it's gonna have representation from everything cool in Fender's past with a nice cool twist to top it off!

I am not saying until I get it in. I'd say it is almost finished by now!

You dirty dawg!

 

[BluesGuyJ]

Re: Create your signature model!

I am going to have Chris Stambuahg build this...

Singlecut design
24 3/4 scale neck
PRS wide fat carve (copy my McCarty neck)
mahog body
quilted mpale top
maple neck, 1 piece
brazilian rosewood fretboard
SS jumbo frets
custom rams head inlays, made of pearl
P rails neck
SSl3 middle
SD 59 bridge, overwound
coil tap system
two tone, two volume
TOM bridge
neck thorugh design
silverburst

cant wait

 

[stevie_bees]

Re: Create your signature model!

I'd have Fender make me a version of the old Squier Super-sonic, something like this:

Not sure what pickups yet, but it would be wired up like the Gibson M-III.

 

[Philcguitars]

Re: Create your signature model!

Ok, just a quick idea [Not as detailed as the original YEM posted] At the moment it'd be:

STRAT
Swamp Ash Body with AAA Quilted Maple Laminate Colour Blue
Masked natural binding
Rear Body Trans Blue

Neck - Vintage Modern Radius
Flame Maple
Schaller Locking Tuners

P/ups - SD Custom shop Staggered and Tapped - Custom shop Left-Handed Staggered - overwound to something around a Quarter Pounder.

Nickel Hardware

Electronics - 5-way switch orientated like a Tele.
3 Push pulls 1 Tone Middle Pup Vol. and Front/Back Volume

NO Pickguard.

Strings - D'addario 10.5 - 48 with 16 on the G.

Setup as low as it goes before it Buzzes!

I think that about does it.

 

[Tux789]

Re: Create your signature model!

dont get me started

Sig 1:

or

25" scale ebony fretboard, block inlay except w/ 1st block missing

BK Nailbomb or Warpig pickups

_______________________________

Sig 2:

or

for shreddy goodness
_____________

and for wierdness

Sig 3:

I don't know why but this always screamed "sexy" to me

Sig 4

hybrid (aka photoshoped) body shape between an sg and a les paul. Kind of looks like a shechter model. It would need a different headstock.

57' classic N/B pickups



Sig 5

My favorite mockup in photoshop. I have no idea how I could get the chrome dog-eared p-90's underneath the pickguard but it just looks so **** cool in my mind


24-fret, 24 3/4" ebony fretboard with trapazoid inlays and 'metalic' binding
2 dog-eared chrome p-90s
'61(?) custom SG style pickguard

 

[Fender_Punk]

Re: Create your signature model!

StevieH Signature Fender Telecaster

Swamp Ash body
1 piece Maple neck w/ skunk stripe. MIM Tele neck profile w/'50s Strat headstock. Silver Spaghetti Fender and "Telecaster" decal
6 brass barrel saddle flat Tele bridge with SD 1/4 lb pickup.
GFS Dream-90 neck pickup.
Master Volume (500k audio), Master Tone (500K linear), 4 way Switch (For middle in series).

Finished in Trans Honey Blonde or Trans Red w/ black pickguard

If I ever did a Squier signature it'd be exactly what my Black Tele is. If I did a Signature Esquire it'd basically be your typical Esquire except with a Phat Cat in the bridge and 500K pots.

 

[ryUK]

Re: Create your signature model!

Body: 2/3-piece alder body, contours standard except extended lower horn cut for better access to upper frets
Neck: Lightly figured Birdseye maple, 22 fret, dual action rod, cream dot markers, 6150 frets. “C” contour.
Micro-tilt adjustment for neck pitch.
Fingerboard: Pao Ferro, compound radius 9.5 through 16, bone nut
Colours: Olympic white, Tabacco Burst and Lt Edition “Sunshine” Solid Yellow (w/ wrap-around black stripes detail on forearm contour)
Pickguard: Custom shape (no lower horn).
Pickguard Colour: Cream on Olympic White, Pearly Black on Tabacco Burst, Yellow Ltd Edition “Sunshine” model has matching pickguard.
Tremolo: 2-point tremolo, block cast saddles, brass block, push-in tension adjustable trem arm, 10.8mm spacing.
Chrome on Olympic White and Burst, Black on “Sunshine” guitar.
Tuners: Schaller locking, staggered posts. Chrome on Olympic White and Burst, Black on “Sunshine” guitar.
Neck P’up: Kent Armstrong “Special” 7k pickup w/brass base plate
Mid P’up: Kent Armstrong “Special” 6.1k pickup (RWRP)
Bridge P’up: GFS “Vintage” 59 8.5K
Pickup covers: Black s/c covers with zebra humbucker.
Switch: 5 Way blade. Position 1=N, 2=N/M, 3=M, 4=M/B(bridge not split), 5=Bridge
Electronics: Built-in “pixie dust” treble boost circuit, single tranny driven circuit. Push-push passive/active switch (located between vol and tone.)
9v battery box at rear.
Jack: Side mounted jack socket.
Controls: 1 x Vol, 1 x Master Tone – Chrome/black Tele knobs.
Strings: Factory fitted with Roto 10-46



Not that I'd thought about it.... much....

 

[B Bent]

Re: Create your signature model!

You dirty dawg!

You know it! How amazing too...

I just got the email from Rob at USACG that it shipped yesterday! Holy cow! It is closer than I dreamed!

 

[Iron Horse]

Re: Create your signature model!

#1 Les Paul ´59 RI with a burst finish that is something like a mix of honey burst and iced tea. Pickups: Brobucker bridge with a Seth in the neck.
#2 Strat: Alder body, maple neck, fingerboard rosewood, the new forum single coils would be everywhere. Oh, it would have a Wilkinson VS100N bridge and locking tuners.
# This: http://muusikoiden.net/dyn/tori/309991.jpg
If I only had 1500 €...

 

[P.A.Foholic]

Re: Create your signature model!

Well, here I go:

Ardez Signature Strat "Caroline"

Color: Vintage White & Candy Tangerine
Body: 1 pc. Alder
Neck: Maple, Thin C shape, 12 radius, Reverse, Bolt-on
Fretboard: Ebony
Frets: 22 Jumbo
Pickups: BKP Crawler bridge, SSL-5 neck and middle (RW/RP)
Controls: Bridge and neck 500k volume pots, 500k master tone, Mini switch for fat boost
Pickup Config: 5-way; 1.bridge 2. Bridge + middle 3. Middle 4. Middle + Neck 5. Neck
Bridge: Wilkinson VG300
Machine Heads: Gotoh Vintage Magnum Lock
Hardware: Black
Pickguard: 3-ply VW, 4-ply Black Tortoise
Scale: 25'5
Strings: Elixir 10-52

Other:

-Swimming pool routing
-Black plastic parts (except the pickguard, of course)
-Dimarzio strap locks
-Graph Tech nut
-No inlays

LIMITED EDITION ALSO AVAILABLE WITH FLOYD

 

[Curt]

Re: Create your signature model!

Strat shape(drop top)
limba body
birdseye maple neck with a flamed maple fingerboard
Pearl block inlays
Pearl binding around the body and up the neck
pearl white finish
gold hardware
grover 6 in line mini roto's
wilkinson VS-100
pearloid pickguard
gold covered alternative 8 in the bridge
white STK-2 in the middle Gold covered pearly gates in the neck(leaving the screws chrome or nickle or whatever the hell they typically are to kinda go with the white, gold and pearl type thing(the chrome or nickle being representative of the white)
gold metal knobs 2 volume 1 tone with a five way switch
25.5 scale

 

[theboatcandream]

Re: Create your signature model!

As of right now, it would look something like this:

Mahogany LP Jr body
24 and 28/32" scale
1 and 23/32" nut width
24 medium-jumbo fret
Quartersawn oil-finish plain maple neck
16" radius pau ferro fretboard, 1 and 23/32" nut width
Rear Routed for 1 Bridge HB (SH-55)

As far as the bridge, I haven't decided on a bridge and stopbar, hipshot babygrand, or a floating bridge assembly.

 

[mfprh]

Re: Create your signature model!

1954 Les Paul
Oxblood finish
Bone nut
6130 fretwire
Seth neck, 500k pots
PG bridge, 250k pots

Simple.

 

[Karmadog777]

Re: Create your signature model!

I already have my signature model
Alder Stratish body , Mahogany Gibsonish neck, Rosewood PRSish fretboard, locked down trem bridge, Greenish color, Invader in the bridge for bringin the fookin' fury, old EMG selects in the useless positions(nice stratty neck tone though)
Wilkenson Roller string tree truss rod cover....thats right WILKENSON ROLLER STRING TREE TRUSS ROD COVER...that you could only Dream of owning
all ebay scores except the neck I ripped the fretboard off of,that I had from a old palmer rich bich copy

as you can see ESP was more than happy to sponsor me

ok posers and dreamers ,back to your pipe dream posting of the un-attainable treasures

 

[rowdy27]

Re: Create your signature model!

Gee U not takin' yer meds, dawg? :jester:

 

[Karmadog777]

Re: Create your signature model!

just workin on my people skills:banghead:
















:ban: