kramersteen
PowerMetalRaph
Just playing around with this. i need to clear the body again.
Does this neck look out of place?
- Thread starter kramersteen
- Start date
80's_Metal
Underglazed Hair Metalologist
Re: Does this neck look out of place?
Looks perfect!
Looks perfect!
gottalovethe80s
New member
Re: Does this neck look out of place?
needs some red on the headstock!
needs some red on the headstock!
kramersteen
PowerMetalRaph
Re: Does this neck look out of place?
i want to put a wrap around bridge on it for maximum image viewing but the neck will need a big shim so i was thinking i would just refret with some ultra jumbo fretwire 2.59mm high 4.33mm wide. it still might need shimming but it wont have to be as drastic.
As for the red on the headstock. i will refinish it with a kreator logo.
i want to put a wrap around bridge on it for maximum image viewing but the neck will need a big shim so i was thinking i would just refret with some ultra jumbo fretwire 2.59mm high 4.33mm wide. it still might need shimming but it wont have to be as drastic.
As for the red on the headstock. i will refinish it with a kreator logo.
Brian Griffin
New member
Re: Does this neck look out of place?
The image should be sharper, crispier. The headstock should be reverse, in contrast with the lower bout which is already pointing downward.
The image should be sharper, crispier. The headstock should be reverse, in contrast with the lower bout which is already pointing downward.
kramersteen
PowerMetalRaph
Re: Does this neck look out of place?
Read again Derick^^ No clear on the image so all the dust is in it.
You have something negative to say on every post yet seem to know nothing.
Show me some of your crap ass work you donkey.
Read again Derick^^ No clear on the image so all the dust is in it.
You have something negative to say on every post yet seem to know nothing.
Show me some of your crap ass work you donkey.
muttznmongrelz
New member
Re: Does this neck look out of place?
Love it! Like that Body Shape and the Graphic.
Love it! Like that Body Shape and the Graphic.
ErikH
Well-known member
Re: Does this neck look out of place?
Looks good to me. Perfect match, IMO.
That's an odd looking bridge route. What bridge was in there?
One thing you can do to avoid shimming is to clean up that bridge route, fill it, then make a recessed TOM route and make it string-thru. No neck angle required.
Looks good to me. Perfect match, IMO.
That's an odd looking bridge route. What bridge was in there?
One thing you can do to avoid shimming is to clean up that bridge route, fill it, then make a recessed TOM route and make it string-thru. No neck angle required.
King IzzO)))
Ultimate Kitten Puncher
Re: Does this neck look out of place?
Looks okie dokie to me.
Looks okie dokie to me.
kramersteen
PowerMetalRaph
Re: Does this neck look out of place?
hehe no its SHH. it was a 24 fret guitar that i have converted to 22 thats why the single is there.
hehe no its SHH. it was a 24 fret guitar that i have converted to 22 thats why the single is there.
ErikH
Well-known member
Re: Does this neck look out of place?
Ohhhhhh. OK. Through a sustainer in there.
You can still go the recessed TOM route if you wanted to.
Ohhhhhh. OK. Through a sustainer in there.
You can still go the recessed TOM route if you wanted to.
kramersteen
PowerMetalRaph
Re: Does this neck look out of place?
I wont be spending a heap of coin on this, Just going to put it together with any half decent parts. The body is plywood too so its not worth too much effort.
Ohhhhhh. OK. Through a sustainer in there.
You can still go the recessed TOM route if you wanted to.
I wont be spending a heap of coin on this, Just going to put it together with any half decent parts. The body is plywood too so its not worth too much effort.
Brian Griffin
New member
Re: Does this neck look out of place?
In my area junk pile of wood goes straight to the chicken-feed mill or the fire place, instead of being used to make guitars that would be a subject of ridicule for poor craftsmanship. But since you ask:
https://www.facebook.com/javaguitarscustomshop/photos_all
Keep your chin up and never stop learning.
Cheers,
BG
In my area junk pile of wood goes straight to the chicken-feed mill or the fire place, instead of being used to make guitars that would be a subject of ridicule for poor craftsmanship. But since you ask:
https://www.facebook.com/javaguitarscustomshop/photos_all
Keep your chin up and never stop learning.
Cheers,
BG
kramersteen
PowerMetalRaph
Re: Does this neck look out of place?
You knob head i build guitars. Once again show me anything you have made or finished.
This project is just some fun i think we all know that.
You knob head i build guitars. Once again show me anything you have made or finished.
This project is just some fun i think we all know that.
