Duncan and Dimarzio out of phase?

[Mpcoluv]

I have always thought that Duncan and Dimarzios are wound out of phase from each other. So when I put a Virtual PAF and a JB in my Ibanez AM-70 (mini 335) I reversed the black and the green on the JB.
Now after rebuilding the ship in a bottle, the pups are out of phase in the middle position....
Was I wrong on the Dimarzio/Duncan phase relationship?
Can I just flip the magnet on the JB and all will be right with the world?

 

[jeremy]

Re: Duncan and Dimarzio out of phase?

just flip those black and green wires and you should be good.

its been so long since ive mixed the two i cant remember but i think they are fine with stock wiring. now fender and duncans are out of phase. just finished doing an american with a qp and had to flip the phase

 

[Mpcoluv]

Re: Duncan and Dimarzio out of phase?

just flip those black and green wires and you should be good.

its been so long since ive mixed the two i cant remember but i think they are fine with stock wiring. now fender and duncans are out of phase. just finished doing an american with a qp and had to flip the phase

Well, I would love to swap the black and green wires, but that would entail dragging all of the harness out again.....I might have to though.

 

[jeremy]

Re: Duncan and Dimarzio out of phase?

you could flip the magnet, but it usually easier to resolder. maybe not so in your case???

 

[jmutations]

Re: Duncan and Dimarzio out of phase?

Are you doing any coil-splitting? If so, flipping the magnet means your treble coils and bass coils will cancel each other (instead of outers and inners, as normal). Otherwise, that should be fine.