Is this a real Seymour Duncan?
- Thread starter Mincer
- Start date
Angus_0413
New member
Hi all,
I am new here.
In 2020 I bought this "Fender Stratocaster Body Loaded With seymour duncan SSL-1 pickups"
I tried to verify the pickups but I could not confirm anything.
DCR is:
Neck 6.13kOhms
Middle 5.83kOhms
Bridge 6.13kOhms
Neck and bridge could match the Alnico 2 Pro...
I am new here.
In 2020 I bought this "Fender Stratocaster Body Loaded With seymour duncan SSL-1 pickups"
I tried to verify the pickups but I could not confirm anything.
DCR is:
Neck 6.13kOhms
Middle 5.83kOhms
Bridge 6.13kOhms
Neck and bridge could match the Alnico 2 Pro...
- SSL-1 are supposed to be 6.5 all around.
- Not sure if they are supposed to be the same at different position, but the middle one definitely sounds different.
- No label, but Bridge and Neck are marked "CR" what could that be? I found that if a label was stating "R", it would mean it was wound by "Connie Rocha" so I thought maybe...
- Pots are definitely SD parts
Attachments
Angus_0413
New member
Why? too much bevel?
On the official pic, they are beveled:
But if I look on ebay, I can see both, or maybe the top one is a fake given the label?
Last edited:
Angus_0413
New member
Are all the numbers on the bottom supposed to be the same?
I’ve got the following answer from SD technical support:
„The numbers on the label do match a job order that we have on file from 2021. I can only go by the label and they do look ok. The baseplate appears to be consistent with our current builds.„
so maybe it’s all fine but I just wanted to share this info here and also ask about other opinions.
„The numbers on the label do match a job order that we have on file from 2021. I can only go by the label and they do look ok. The baseplate appears to be consistent with our current builds.„
so maybe it’s all fine but I just wanted to share this info here and also ask about other opinions.
Maybe Seth Lover
Gotcha, so they were made at the same time, as 1 order for one guitar.
Join date 2008 and first post in 2025? Seems normal... :33:
Artie
Peaveyologist
That's not really too weird. There was an electrician professional's forum I joined because I needed info on house wiring. I joined so that I could see the attached files and pics. All my questions had been asked before, that I found by searching. So I never contributed much because I couldn't offer much to the pro's. It happens.
Artie
Peaveyologist
Wow. This is pretty blatant. No actual mention of Seymour Duncan, but check out the base plate.
https://www.amazon.com/Kisangel-Hum...98-a33c-24c45295f222&pd_rd_i=B0FB7Q5J4F&psc=1
https://www.amazon.com/Kisangel-Hum...98-a33c-24c45295f222&pd_rd_i=B0FB7Q5J4F&psc=1
This sort of thing is getting more common.
Artie
Peaveyologist
And some of the worst cover soldering I've seen.
Doublechinmask
New member
Hi fellas,
looking to buy this loaded pickguard thats sold locally but I have a hunch this arent real SD's.. Pots also look lice CTS but seem to be unbranded.
What do you think?
Seymour Duncan Stratocaster pickguard (Na upit)
https://olx.ba/artikal/69982520
looking to buy this loaded pickguard thats sold locally but I have a hunch this arent real SD's.. Pots also look lice CTS but seem to be unbranded.
What do you think?
Seymour Duncan Stratocaster pickguard (Na upit)
https://olx.ba/artikal/69982520
Similar threads
